12650 - Nemectron EDiT® 400

Multiple programmable, user-friendly, two channel therapy unit.

With the EDiT® 400, Nemectron is again setting new standards in "Electric Differential Therapy" and has significantly improved even more on its previous well-proven and thousand times-tested system. Effective therapy options are offered for use in private clinics and hospitals.

Effects
• Stimulating current effects of the EDiT® 400:
Those effects are based on the repeatedly depolarisation  and repolarisation of excitable cells (nerves or muscles).
• Healing current effects of the EDiT® 400:
Those effects are not produced by de- and repolarisation of excitable cells, but are based on the most recent results from electro-medical research.
EDiT 400 + Endovac
EDiT® 400 + Endovac
Choice with EDiT® 400
• The five EDiT® 400 forms of therapy:
By selecting "Individual therapy" the complete range of treatment options can be set up:
» bipolar AMF frequency therapy (near the electrodes)
» interferential therapy (depth effect)
» Endosan 2-pole therapy (near the electrodes)
» Endosan 4-pole therapy (depth effect)
» direct current therapy
• Freely programmable with 30 options:
The therapist can freely create 30 programs with 5 program parts, according to specialists reference or indication related requirements. For frequent use selection from the presets is available.
• Six preset therapy programs:
The most appropriate therapy for the treatment of most common problems in the daily practise are preset and optimized to reach the highest therapeutic effects. This makes operation of the unit very simple and reduces the time of working to a strict minimum.

Additional built-in features
• Endodyn® for amplification of the effects in deeper layers of tissue.
• The S4000 stimulation time and pause controller for simultaneous or alternating muscle stimulation or pain treatment.
• Automatic safety checking and self-regulation.
• Common display for both channels.
• Standard frequency range 0,1-225 Hz or 4000 Hz. Selection of frequency sweep or fixed frequency.

More economical through greater flexibility: the two-channel system makes it possible to treat 2 patients simultaneously, with different or similar treatment protocols, or simultaneously treat one patient with 2 forms of therapy.

Specifications
• mains supply: 100-230 V - 50/60 Hz
• power consumption: ± 450 mA
• treatment time: 1 - 60 min.
• intensity: 0-90 mA at 500Ω with Endodyn off / 0-20 mA for DC therapy
• dimensions: w 450 x d 450 x h 165 mm
• weight: 8,1 kg
• CE

Options
12655 - Accessory set 1 for EDiT® 400
4 SCR electrodes 7 x 7 cm, 4 viscose covers, 1 fixation strap 60 x 10 cm, 1 fixation strap 90 x 10 cm, 1 four-way cable
12656 - Accessory set 2 for EDiT® 400
Idem as set 1, but electrodes and covers of 7 x 12 cm

 
modality center
Modality center

12660 - Nemectron Endovac® 400

Professionals will save considerable time with each treatment as the electrodes are integrated into the suction cups and the time wasted to fixate the normal electrodes to the proper spots is eliminated completely. This makes the Endovac® 400 to an essential component in modern electrotherapy.

Features of the Endovac® 400
• constant vacuum
• pulsating vacuum with 3 levels
• bipolar and quadripolar application of electrodes
• gliding suction massage by using massage cups
• vacuum intensity from 0,07 to 0,80 bar
• extensive number of special accessories (e.g. tetrapolar electrodes, vacuum massage cups)
• low noise level of vacuum pump
• mains voltage: 220/230V - 50 Hz
• power consumption: 99 W
• dimensions: w 450 x d 450 x h 165 mm
• weight: 12 kg

Options
12665 - Connection cable between EDiT 400 and Endovac 400
12666 - Standard vacuum set 1 for Endovac 400
4 vacuum electrodes Ø 60 mm, 4 sponges Ø 60 mm, set of coloured vacuum cables, 2 closing pins
12667 - Standard vacuum set 2 for Endovac 400
Same as set 1 but with vacuum electrodes and sponges of Ø 90 mm
12670 - Modality Center for EDiT 400 / Endovac 400
Internal electric connections for all the machines, just one mains cable.
Sturdy and compact design on 4 large castors, equipped for fixing 2 units.
Option: 12671 - holder for vacuum electrodes
© Fysiomed NV - SA URL: www.fysiomed.com email: info@fysiomed.com